Yakima Spare Tire Carrier for Yakima Cargo Baskets

Buy Cheap Yakima Spare Tire Carrier for Yakima Cargo Baskets

Buy Low Price From Here Now
Everybody knows the best place to carry a spare tire is in your cargo basket (as opposed to around your waist). Accessory for mounting a spare tire inside the LoadWarrior and MegaWarrior baskets.
Readmore

Technical Details

- Keeps tire accessible and out of the way
- Quick release for easy installation and removal
- Carries spares up to 35�
- Dimensions: Bottom plate is 5-3/4 x 12.
- Weight: 6.5 lbs.
See more technical details

Images Product

Buy Yakima Spare Tire Carrier for Yakima Cargo Baskets Now

Sunlite Bicycle Monostay Adapter

Buy Cheap Sunlite Bicycle Monostay Adapter

Buy Low Price From Here Now

Readmore

Technical Details

- For attaching rear racks onto mono stay bikes
- Original
See more technical details

 "Too cheaply made to be trusted" 2008-07-02
By D. Pryor
The flat bracket that goes around the back of the monostay and attaches to the rack is made of such a soft metal that as I screwed the bolts into the horseshoe shaped piece it simply bent and could not be made completely tight. When I attach something to my bike I like to think that it's going to stay put and not wiggle around. I gave it two stars because it's probably okay for light loads.

 "Gets the job done." 2008-05-21
By B. Norland (Windsor, CT)
Great so far, only about 50 miles of riding. I ride a tandem and had to mount the bracket about half way up on the stoker seatpost but the rubber coating on the loop sticks well. Rear rack is very stable with this setup. The small pad between the C bracket and the seatpost slips off and leaves a gooey residue, but not a huge issue. Overall very good, and if it holds up and doesn't break I would give it four stars. It's a bummer paying more in shipping than the item cost, but I couldn't even find a bike shop that knew what a mono-stay adapter is, never mind actually selling it.

 "Not for Trek Navigators" 2007-08-03
By diamond eyes
Be forewarned: this adapter might be too small for your bike!



It is too small to fit around the monostay on my Trek Navigator 300 comfort/hybrid bike. The "U" bar would need to have arms that were about least 1/4 inch longer.



Your bike might be fine. My Trek has thick frame bars.


Images Product

Buy Sunlite Bicycle Monostay Adapter Now

Softride Gooseneck Adapter

Buy Cheap Softride Gooseneck Adapter

Buy Low Price From Here Now
The Softride Gooseneck Adapter lifts your bike rack an additional 4" to provide clearance above the road.
Readmore

Technical Details

- For 2" Bike Racks and Receivers
- Includes QuietRide¿ anti-rattle tightening hitch bolt and lock
- Robotically Welded
- Poweder-Coated Finish
- weighs 2lbs
See more technical details

Images Product

Buy Softride Gooseneck Adapter Now

Hitch Mounted Bike Rack - 4 Bike

Buy Cheap Hitch Mounted Bike Rack - 4 Bike

Buy Low Price From Here Now
The 4 Bike Rack mounts to your hitch to haul up to 4 bicycles. The swing down bike rack is designed to swivel out of the way to gain access to the rear of your vehicle without taking the bike carrier off or removing the bikes. The 4 bike rack swings down with a flick of a metal clip. The four bike carrier won't wobble either, thanks to the pinch hitch pin that takes the slack out of the cargo carrier for a solid and safe transport.
Readmore

Technical Details

- 1 Year Warranty
- Strong 1" steel square tubing with a reinforced brace
- Swing down feature allows you to access your hatchback vehicle, SUV, or truck bed
- Pinch-pull system takes out the wobble while going down the road
- Special Adaptor (included) works on class I, II, III, & IV hitches
See more technical details

Images Product

Buy Hitch Mounted Bike Rack - 4 Bike Now

Yakima SuperJoe 2

Buy Cheap Yakima SuperJoe 2

Buy Low Price From Here Now
The Yakima® SuperJoe is a great solution for occasional riders who want the extra protection of anti-sway cradles. Integrated StableCradles hold your bikes firmly in place, and padded feet protect your paint job.
Readmore

Technical Details

- Easy-to-install Quick Trigger Hub System
- 2-bike capacity
- Narrow arm design fits a wide variety of bikes
- Integrated StableCradles hold bikes firmly in place
- Padded feet protect your paint job
See more technical details

 "Great product" 2009-12-06
By D. Brown (WICHITA, KANSAS, US)
Excellent product.. Highly recommend! Does NOT flex when driving like many other bike racks do.

 "so far, so good" 2008-04-30
By Linda (Westchester, NY)
QUICK and easy to remove by releasing the two top straps. Once the straps are adjusted to your car it is easy and QUICK to place back on your car. Need to only adjust the two top straps. Would have liked it to fold up, but then again I would have adjust the arms each time. Find it a little awkward(positioning self)to pull straps to tighten.



A little hard to pull the red buttons out to adjust arms, but once it is done you never have to do it again unless you change vehicles.


Images Product

Buy Yakima SuperJoe 2 Now

XPORT Universal Bike Mount

Buy Cheap XPORT Universal Bike Mount

Buy Low Price From Here Now
Secure, fork mount maximizes cargo space. Mounts to almost any flat surface. For the most efficient use of space, attach the Universal Bike Mount at an angle to avoid handlebar overlap. Beefy 9mm skewer.
Readmore

Technical Details

See more technical details

Images Product

Buy XPORT Universal Bike Mount Now

Yakima Axe Shovel Bracket

Buy Cheap Yakima Axe Shovel Bracket

Buy Low Price From Here Now
Hey, you never know when you�re going to need to build a log cabin and/or dig a latrine. Attaches a single or double bit axe or shovel to Load/MegaWarrior Baskets. Capacity: 1 axe or shovel.
Readmore

Technical Details

- Weight 1.82 lbs per pair
- Capacity 1 axe or shovel
See more technical details

Images Product

Buy Yakima Axe Shovel Bracket Now

Yakima Strap Caps

Buy Cheap Yakima Strap Caps

Buy Low Price From Here Now
Yakima strap caps make it even easier to tie your stuff to your rack. Replace the stock cross bar ends with ones that have a hook to stop straps or ropes from sliding past the end.
Readmore

Technical Details

- Will protrude approximately 1/2"
- Fit Yakima Round Bars
- Set of 4
See more technical details

Images Product

Buy Yakima Strap Caps Now

Swagman Locking Knob for Originals

Buy Cheap Swagman Locking Knob for Originals

Buy Low Price From Here Now
Swagman Locking Knobs... secure your bike! Built specifically for the Swagman bike carrier line, these Locking Knobs provide peace of mind while you roll down the highway! Screw 'em in to your bike rack for a gorilla grip on your bicycles. Knobs come in packs of 2. Put the clamps on your bike while you travel... order these Locking Knobs today! Swagman Locking Knobs
Readmore

Technical Details

- Replace Tension Knob on most bike racks.
- New Keyed Secure Lock
- Easier to Use than Padlocks
See more technical details

Images Product

Buy Swagman Locking Knob for Originals Now

Yakima WindJammer

Buy Cheap Yakima WindJammer

Buy Low Price From Here Now
The Yakima Windjammer is a cost effective means of cutting down wind noise produced by Yakima Round Bars. For those of you on a tight budget, it is a cheaper alternative to a Yakima Fairing.
Readmore

Technical Details

- Dimensions 1-1/4 H x 3-3/4 W x 8 L
- Weight 1 lb.
- Locking No
- Attachment Round bars
See more technical details

 "Such a difference!" 2009-02-04
By J. Nettles (Weston, WV USA)
I tried this before the fairing, because it's cheaper, smaller and simpler. We had a really disturbing noise before, and the noise is practically gone with the windjammer. From others reports though, it seems like success varies from vehicle to vehicle. One concern was that it's easy to steal (ziplock style closure). I superglued mine shut, and slide it off the bar if I need to remove it (which I never do). Definitely worth a try!


Images Product

Buy Yakima WindJammer Now

Thule 871XT Fairing-38-No-Colr

Buy Cheap Thule 871XT Fairing-38-No-Colr

Buy Low Price From Here Now
The Thule Fairing cuts down on the drag and wind noise that your Thule bars make when you're blasting down the highway on your way to parts unknown with a roof full of gear. Thule Fairings are cake to install, and use rubber bumpers and anti-scuff film to protect your vehicle's finish. Editors Note: Please call if you aren't certain what parts you need to install your rack.

Product Features

• Thule Part# 870-871-872-873
• Country of Origin: United States

Readmore

Technical Details

- Integrated hardware for easy installation
- Rubber bumpers and anti-scuff film protect vehicle finish
- Consult Thule Fit Guide or visit www.thuleracks.com for proper size for the vehicle
- Redesigned for 2008 to work with both the standard and aero systems
See more technical details

 "Reduce your wind noise!" 2008-04-14
By JuanF (Lima Peru)
I bought this for the looks and also to reduce the wind noise of my thule bars, work grad and my montero looks like a Nissan Xterra


Images Product

Buy Thule 871XT Fairing-38-No-Colr Now

Yakima Landing Pad Base for Yakima Control Towers (11)

Buy Cheap Yakima Landing Pad Base for Yakima Control Towers (11)

Buy Low Price From Here Now
Yakima Landing Pad 11 is essential to mount Yakima Control Towers. Landing Pad includes hardware for mounting to factory mounting points. Sold in pairs
Readmore

Technical Details

- For use with approved OE mounting points
- Landing Pad 10 is used with Yakima Control Towers, sold separately
- Includes a snap-on cover when not in use
- Each pad sold in a set of two
- For specific fit information, see the Yakima Automated Rack Fit Guide
See more technical details

 "Dented my roof" 2009-06-23
By H. KIM
I have a BMW 3 series sedan, and for this car, I needed to buy the control towers and landing pad base(11). I followed the instructions carefully and had the rack installed, but when I removed the rack for a car wash, I realized that the roof was dented in. Apparently I had tightened the bolts too much. The landing pad was a rubber piece that compresses as the bolt is tightened, and it's difficult to tell visually when the rigid plastic control tower behind it is touching the roof. Also, the resistance of the bolt during tighting did not vary that much - the bolt kept on turning on without much effort. The estimate for repair = $2000.

 "Fits well on 07 CRV" 2009-05-30
By Scott Stevenson
Install is bit of a slog, but that's same for any rack mount on the CRV. You have to work the nuts on and off the threaded studs on the vehicle roof to clear off the paint on them. Then after putting the landing pad on tightening the nuts is pretty stiff with the allen wrench provided. They look good though and have a nice cover for when towers/bars are not in use. Towers snap right in and are solid.


Images Product

Buy Yakima Landing Pad Base for Yakima Control Towers (11) Now

Upright Roof Rack

Buy Cheap Upright Roof Rack

Buy Low Price From Here Now
Versatile and lockable. Tie-down straps for wheels included. Fits Thule, Yakima and OEM bars. Capacity:1 Bike Mount:Roof Mount
Readmore

Technical Details

- Upright Roof Rack
See more technical details

 "not very solid" 2008-08-13
By Vladimir Reznik (Glenview, IL USA)
Easy to install/remove but not very solid. My hybrid bike isn't very stable (I can see it moving through the sun roof). Also the company did not respond on my email about adapters to fit elongated bars.


Images Product

Buy Upright Roof Rack Now

Yakima Landing Pad Base for Yakima Control Towers (1)

Buy Cheap Yakima Landing Pad Base for Yakima Control Towers (1)

Buy Low Price From Here Now
Yakima Landing Pads work in conjunction with Control Towers (our item no.: YAK0079) as a quick n' easy-to-install rack. Landing Pads (LP) fit a broad range of factory tracks, and can also be applied directly to the vehicle roof with plusnut hardware. [For those already familiar with Yakima products, LP 1, 2, and 3's will fit the same vehicles as Locking RailRider 1, 2, and 3's.] LP4's fit Chrysler and Dodge Minivans, LP5 Isuzu Axiom, and LP6 camper shells. **SOLD IN SETS OF 2.

Product Features

• Country of origin: China

Readmore

Technical Details

- Landing Pad 1 is used with Yakima Control Towers, sold separately
- Custom Landing Pads fit a broad range of factory tracks and other applications
- Includes a snap-on cover when not in use
- Each pad sold in a set of two
- For specific fit information, see the Yakima Automated Rack Fit Guide
See more technical details

 "Dented my roof" 2009-06-23
By H. KIM
I have a BMW 3 series sedan, and for this car, I needed to buy the control towers and landing pad base(11). I followed the instructions carefully and had the rack installed, but when I removed the rack for a car wash, I realized that the roof was dented in. Apparently I had tightened the bolts too much. The landing pad was a rubber piece that compresses as the bolt is tightened, and it's difficult to tell visually when the rigid plastic control tower behind it is touching the roof. Also, the resistance of the bolt during tighting did not vary that much - the bolt kept on turning on without much effort. The estimate for repair = $2000.

 "Fits well on 07 CRV" 2009-05-30
By Scott Stevenson
Install is bit of a slog, but that's same for any rack mount on the CRV. You have to work the nuts on and off the threaded studs on the vehicle roof to clear off the paint on them. Then after putting the landing pad on tightening the nuts is pretty stiff with the allen wrench provided. They look good though and have a nice cover for when towers/bars are not in use. Towers snap right in and are solid.


Images Product

Buy Yakima Landing Pad Base for Yakima Control Towers (1) Now

Yakima Rattler Bicycle Wheelstrap

Buy Cheap Yakima Rattler Bicycle Wheelstrap

Buy Low Price From Here Now
Rattler Wheel strap is designed for Yakima bicycle attachments. Rattler Wheel strap fits both road and mountain bike wheels. Ratcheting mechanism allows you to tighten the wheel securely in the tray.
Readmore

Technical Details

- Ratcheting mechanism allows you to tighten the wheel securely in the tray
- Wheel strap fits both road and mountain bike wheels
- Rattler Wheel strap is designed for Yakima bicycle attachments
See more technical details

 "Heavy Duty and Holds Tight" 2009-10-10
By Tennessee Ken (Nashville, Tennessee)
I had to buy a pair of these after a friend donated a Yakima rack to me that was missing the straps. These are made of very heavy duty plastic, and the ratcheting action on them will clamp your tires down as tight as you need to. I just hope they stand up to a few years of being in the rain, sun, heat and cold.


Images Product

Buy Yakima Rattler Bicycle Wheelstrap Now

Yakima Hitch Mount Rack Hitch Adapter (2-Inch to 1.25-Inch Receiver)

Buy Cheap Yakima Hitch Mount Rack Hitch Adapter (2-Inch to 1.25-Inch Receiver)

Buy Low Price From Here Now
The Yakima® 1.25-in hitch adapter converts 2-in receiver hitch racks to a 1.25-in hitch. It works with the Yakima® KingPin 2, KingPin 4, SlickROC 4, and BigHorn 4.
Readmore

Technical Details

- Rear hitch adapter designed for 1.25-inch hitch receivers
- Makes 1.25-inch receiver work with 2-inch hitch
- Ideal for SUVs and other vehicles with small receivers
- Works with BigHorn 4, KingPin 2, and KingPin 4 bike racks
See more technical details

 "Does what it's supposed to" 2008-04-14
By C. Campbell (Athens, GA)
Great having this adapter--We have cars with both the 2in and 1.25 in receivers and this allows the use of both flawlessly.


Images Product

Buy Yakima Hitch Mount Rack Hitch Adapter (2-Inch to 1.25-Inch Receiver) Now